XLS Series crown

XLS Series

Minimum Guaranteed Power per channel, both channels driven
	XLS 202	XLS 402	XLS 602	XLS 802	XLS 5000
1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.)	--	--	--	--	2,500W**
Stereo, 4 ohms (per ch.)	300W	450W	600W	800W	1,800W*
Stereo, 8 ohms (per ch.)	200W	300W	380W	500W	1,100W*
Bridge-Mono, 8 ohms	600W	900W	1,200W	1,600W	3,600W*
Bridge-Mono, 4 ohms	--	--	--	-- *750W for 100V models	5,000W** *with 0.1% THD **with 1% THD

• Reliable design incorporates many popular features

• Reliable design incorporates many popular features
• Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
• Efficient forced-air fans prevent excessive thermal buildup
• Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
• Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
• Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

For product availability and pricing please contact your local dealer.

Specifications

Sensitivity (volts RMS) for full rated power at 4 ohms	1.25
Frequency Response (at 1 watt, 22 Hz - 20 kHz)	+0 dB, –1 dB
Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power	> 100 dB > 95 dB
Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz	< 0.5%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB	< 0.3%
Damping Factor (8 ohm): 10 Hz to 400 Hz	> 200
Crosstalk (below rated power) at 1 kHz at 20 kHz	–75 dB –50 dB
Input Impedance (nominal) (balanced, unbalanced)	20 kilohms, 10 kilohms
Load impedance Stereo Bridge mono	4-8 ohms 8 ohms
AC Line Voltage and Frequency Configurations Available (± 10%)	120 VAC 60 Hz 100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz
Ventilation	Flow-through ventilation from front to back
Cooling	Internal heat sinks with forced-air cooling
Air Volume Requirements (per minute per unit)	80.15 ft3 (2.27 m3)
Dimensions: Width, Height, Depth	XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D. XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D.
Net Weight, Shipping Weight	XLS 202: 23.0 lb (10.4 kg), 28.0 lb (12.7 kg) XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg) XLS 602: 29.0 lb (13.2 kg), 34.0 lb (15.4 kg) XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg) XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg)